Professional Remote EMF Testing and Consultation: Anywhere in the USA
Concerned about electromagnetic fields in your home but live outside our local service area? ClearEMF offers professional remote consultations that guide you through collecting EMF measurements using recommended testing equipment. We review your findings and provide personalized recommendations.
Professional Remote EMF Consultation: $400.00 · Equipment sold separately · Served nationwide
How Our Five-Step Process Works
One clear path from your first concern to a professional findings report. You always know what you have completed, what comes next, and how to reach us.
-
Register
Tell us about your home and your concerns. It takes about five minutes.
-
Pay the Consultation Fee
Pay via a secure, personalized Square invoice. Card is accepted, though ACH transfer is preferred.
-
Get Recommended Equipment
After payment clears, we choose the specific meters for your needs. We avoid generic lists.
-
Measure Your Home
Follow our beginner-friendly, step-by-step measurement guide at your own pace.
-
Receive Your Consultation
We review your readings, walk through the findings with you, and deliver your professional report.
What Is Remote EMF Testing?
Remote EMF testing is a professional consultation delivered without an onsite visit. We pair you with the right measurement instruments, give you a clear protocol for measuring your home, and then personally review the data you collect.
We built this for people outside our Buffalo and Western New York service area. You get the same measurement-based, no-hype approach we use for in-person inspections, but applied to your own home with your own eyes on the meters.
Every reading you submit is interpreted in context: the instrument used, the mode, the distance from the source, and the conditions at the time. Different meters measure different quantities, and we explain what your numbers actually mean rather than comparing unlike values.
You receive a written findings report and a consultation to answer your questions. We are practical, prioritized, and honest about what a remote assessment can and cannot tell you.
Who Can Benefit From Our Service?
Homeowners Nationwide
You live outside Buffalo/WNY but want a professional assessment of your home's electromagnetic environment.
Apartment & Condo Residents
You cannot control building wiring or shared equipment, and you want to understand what you can influence in your own unit.
Wi-Fi & Wireless Concerns
You want to know what actually arrives in the rooms you use from cell signals, smart meters, routers, mesh systems, or smart devices.
Electrical & Dirty Electricity
We measure wiring, transformers, appliances, or high-frequency noise on your outlets at the source instead of guessing.
Solar & Inverter Owners
You have a solar installation and want to measure what the inverter and wiring are contributing.
Office & Workspaces
You spend long hours at a desk near equipment and want data before deciding what to change.
What Types of EMF Can Be Measured?
Four measurement categories, each with its own instrument, units, and technique. Your guide covers all of them in plain language.
Radiofrequency (RF)
Wi-Fi, Bluetooth, cell signals, smart meters, baby monitors, and other transmitters. Measured in mW/cm² or mV/m with peak-hold over a long window, because many sources transmit in bursts.
Magnetic Fields
Produced by current flow: wiring, appliances, transformers, and electrical distribution. Measured in milligauss (mG) or microtesla (µT), and they fall off quickly with distance.
Electric Fields
Produced by voltage: wiring, devices, and static charge. Measured in mV/m. They are easily shielded by ordinary materials, so measurement location matters a great deal.
Dirty Electricity
High-frequency voltage noise on your building's wiring, produced by many modern electronics. A microsurge meter measures wall outlets in GS units. This is a wiring measurement, not an in-air one.
Readings from different meters cannot be compared without considering units, operating conditions, instrument limitations, and technique. That is exactly what our review is for.
What Your $400.00 Consultation Includes
- Personal review of your concerns, property, and goals
- Equipment selection matched to your specific situation
- Step-by-step measurement guide for your home
- Secure dashboard to record readings, upload photos, and track progress
- Professional review and interpretation of every measurement
- One-on-one consultation to walk through the findings
- Written findings report with practical, prioritized recommendations
The fee covers professional services only. Testing equipment is purchased separately, and only the instruments we recommend for your situation are needed.
Why Choose ClearEMF?
Measurement-Based, Not Fear-Based
We use numbers, units, and conditions. We tell you plainly when a source does not matter.
Experience Since 2012
ClearEMF has performed EMF inspections across Buffalo and Western New York for over a decade.
Every Major Exposure Category
We measure magnetic fields, electric fields, microwave/RF radiation, and dirty electricity the way each is meant to be measured.
Clear Reporting
You receive findings you can act on: what was measured, what it means, and practical next steps in priority order.
What You Receive in Your Final Report
Your report is a professional document, not a raw data dump. It includes:
- Your property and the instruments used
- Measurement locations, recorded values, units, and conditions
- Analysis and interpretation of what the numbers indicate
- Potential sources identified
- Practical mitigation recommendations, prioritized
- Instrument and remote-testing limitations, stated plainly
- Follow-up suggestions
Please Read: Limitations
ClearEMF provides professional environmental EMF measurement consultation and practical recommendations. Remote results depend on your instruments, your procedures, and your measurement conditions.
A remote consultation may not identify every source or condition that an onsite inspection could discover. This is a professional assessment, not an onsite inspection.
This service does not provide medical diagnoses or treatment. Information on this website is educational and is not medical, legal, or professional advice.
Frequently Asked Questions
What is remote EMF testing?
Remote EMF testing is a guided, professional consultation where we help you measure the electromagnetic fields in your home using recommended testing equipment. You collect the readings following our step-by-step instructions, submit them to us, and we review everything, walk you through the findings, and provide a professional report with practical recommendations. It is designed for people who live outside our local service area.
Who is the remote consultation for?
This is for homeowners, renters, and office occupants across the United States who cannot have an in-person inspection. It serves those concerned about electromagnetic fields (Wi-Fi, smart meters, cell signals, wiring, appliances, transformers, or dirty electricity). If you are in Buffalo or Western New York, an onsite inspection is usually the better fit.
Must I purchase multiple meters?
No. After payment is processed, we list only the necessary meters in your account area based on your needs. This could be a single multi-field unit, individual RF and dirty electricity meters, or a few different types.
How much does the remote consultation cost?
The professional remote EMF consultation is $400.00. This covers the equipment selection, guided measurement instructions, review of your measurements, the consultation itself, and your written findings report. Testing equipment is purchased separately and is not included in the fee.
How do I pay?
We email a personalized Square invoice after reviewing your registration. You may pay by card or ACH bank transfer (preferred). Our website never collects banking details. We send meter recommendations once the payment clears.
Is a remote consultation the same as an onsite inspection?
No, and we will always be straight with you about that. A remote consultation depends on the instruments you use, your measurement technique, and the conditions in your home. It may not identify every source or condition that a full onsite inspection could discover. This professional assessment uses measurements. It is not medical advice or an onsite inspection.
What do I receive at the end?
A professional findings report covering your measurements, our analysis, the potential sources we identified, instrument and remote-testing limitations, and practical, prioritized mitigation recommendations, plus the consultation itself where we walk through everything together.
What if I already own an EMF meter?
That is great. List your meter during registration or in your dashboard. We will tell you whether it covers what you need to measure, and only recommend additional equipment if your situation requires it.
Start Your Remote Consultation
Describe your property and concerns. We personally evaluate each registration before emailing a Square invoice. After the payment is finalized, we provide meter recommendations. Your data stays private and serves only this consultation. See our privacy policy.